Anjon Manufacturing Monsoon Series 6,100 GPH Submersible Pond and Water Garden Pump – MS-6100

Price: $322.00
(as of Jan 05,2023 14:30:24 UTC – Details)

Product Description

Anjon Manufacturing Monsoon Series Submersible Pumps

Perfect for Any Size Water Feature!

The unique design of the Anjon Monsoon Asynchronous series makes it an ideal choice for fountains, waterfalls, and ponds of all sizes. With the driveshaft and electromagnetic rotor recessed in an epoxy-filled housing, operation is near silent while sustaining an extremely low operating cost. The high flow, energy-efficient hybrid drive technology combines the high flow characteristics of a direct drive pump with a mag drive pump’s energy-saving efficiency. Engineered for 24-hour continuous use, the overload sensor prevents burnout, while the intake screen prevents clogging, passing solids up to 0.25 inches. The variable speed controller (not included) permits you to increase or decrease pump flow as needed. Monsoon Series Pumps contain no oil and are completely safe for fish, wildlife, and aquatic plants. Note: The speed controller is NOT compatible with the MS8000, MS10000, MS12500, MS3000100, MS5200100, MS6100100, MS80001000, MS10000100, MS8000200, MS12500200 & MS15000200.

No matter how big or small, Monsoon Pumps can do it all! Whether you are looking to create a small backyard pond, a dramatic waterfall, or a stunning fountain, Monsoon Pumps are the perfect solution. With flow rates ranging from 550 to 12,500 gallons per hour, you are sure to find the right size pump to power your project.

Monsoon Series Models 550 – 2000

Monsoon Series Models 3000 – 12500

Choosing the Right Pump for My Water Feature

Pond Type:

Water Garden, Few Small Goldfish: Circulate total pond water volume every 2 hours. Example: 2,000 GPH pump for 3000-gallon pond with 2″ waterfall.

Fish Pond, Several Small Fish: Circulate total pond water volume every 1 hour. Example: 3,800 GPH pump for 3000-gallon pond with 2″ waterfall.

Koi Pond, Several Large Fish: Circulate total pond water volume every 3/4 of an hour. Example: 5,500 GPH pump for 3000-gallon pond with 2″ waterfall.

Head Height:

To calculate the head height, take the vertical height of your waterfall; the distance between where your pump is (typically in the skimmer) and where your waterfall is, and adding the static head pressure (pipe and fittings) 1′ for every 10″ of tubing and 1′ for every elbow or “T” fitting.

Example: 3′ (vertical height) + 2.5 (25′ of tubing) + 2′ (for 2 elbows) = 7.5′ of Dynamic Head Pressure

Note: Head height is important to take into consideration due to the laws of fluid dynamics. Please refer to the flow chart above to help choose the correct pump.

Hose Sizing Chart

Choosing the Right Size Hose for My Water Feature

When Sizing your Freeze Flex Pond Hose, make sure you choose a pipe that will not restrict the flow of your pump!

If your hose is 1.5″ and you buy a 6,000 GPH pump, your pipe will only allow 4,400 GPH to pass through it. You will be wasting money on electricity and paying for a stronger pump that will not give you the desired result. You will need to run an additional pipe or change your hose to get the desired flow rate!

We get many calls from customers that expected greater flow after buying a 6500 GPH pump. They do not realize that flow will not increase unless the tubing can also support this increase inflow. Please do not let this happen to you.

Using the chart above, you will be able to easily determine the best size tubing for your pump size.

Do not use pumps on an extension cord. They must be run on a dedicated 15 Amp GFI circuit.

Monsoon Series Submersible Pumps Specifications Chart

How Much Water is Held by My Water Feature?

Rectangular Ponds

Length x Width x Average Depth x 7.48 = Gallons

Example: A rectangular pond that is 15’ long, 10’ wide and 1.5’ deep is… 15’ x 10’ x 1.5’ x 7.48 = 1683 Gallons

Oval Ponds

Length x Width x Average Depth x 0.8 x 7.48 = Gallons

Example: An oval pond that is 15′ long, 10′ wide, and 1.5′ deep is… 15′ x 10′ x 1.5′ x .08 x 7.48 = 1346 Gallons

Round Ponds

Radius x Radius x Average Depth x 3.14 x 7.48 =Gallons

Example: A round pond that has a 12′ diameter and is 1.5′ deep is… 6′ x 6′ x 3.14 x 1.5′ x 7.48 = 1268 Gallons

Streams

Length x Width x 0.25 x 7.48 =Gallons

Example: A stream that is 20′ long, 3′ wide, and 3″ deep is… 20′ x 3′ x 0.25 x 7.48 = 112 Gallons

Check Out Other Pumps From Anjon Manufacturing!

Big Frog Pumps

With less than 1% return ratio, these pumps just don’t fail! Perfect for high head applications, these direct drive pumps have the ability to pass solids up to 1.25″ in diameter and have a removeable fish/frog guard to protect wildlife.

Landshark External Pumps

External pond pump equipped with a low maintenance direct-drive motor for high head applications. High quality seals and bearings built to last and a thermal sensor to prevent overheating. Built-in, removable, oversized debris basket with a quick-release cover to prevent clogs.

Big Frog Eco-Drive Pumps

These pumps are specifically designed for low head applications to work with 90% of all ponds. With an overload sensor shut-off protection, these pumps are able to prevent overheating and burning out. Plus, the low suction point is perfect for clean-outs and draining!

High flow, energy efficient hybrid drive technology combines the high flow characteristics of a direct drive pump with the energy saving efficiency of a mag drive pump
Asynchronous drive motor can be controlled with variable speed controller (not included) that permits you to increase or decrease pump flow as needed
Impeller passes solids to .25”. Engineered for 24-hour continuous use; overload sensor prevents burnout
Contains no oil; completely safe for fish, wildlife and aquatic plants
2-year manufacturer’s warranty: (The speed controller does NOT work with the MS10000, MS12500–(these two 30 foot cord models), (MS3000100, MS5200100, MS6100100, MS80001000, MS10000100, MS8000200, MS12500200, MS15000200–all 100 foot cord models)).